Skip to main content

Take 2: Behind The Scene Comparison of Fluoro Fixed & Mobile Units

Fluoroscopy consists of two types of units--fixed and mobile.  Fixed means... well, that it's fixed to the floor; whereas a mobile units is- Da DaDaDa Daaa- Mobile!  Let's take a moment to really understand this, yes?  Okay, great.  Most hospitals are equipped with fixed fluoro units to be used for a large variety of applications and procedures.  Theses include but certainly are not limited to barium enema studies, angiography studies, endoscopy studies, and endovascular procedures.  Mobile units are smaller, portable versions of the fixed units, which are called C-Arms, that are designed in the shape of the letter "C" allowing them to be positioned over gurneys and tables.  Though both units can perform the same functions, fixed fluoroscopy equipment does 
provide advantages over the C-Arm such as: 
  1. Better Image Quality
  2. Larger Image Intensifier resulting in
  3. Increased Field of View (FOV)
  4. Reduced Radiation Exposure
  5. Improved Post-Processing Capabilities.
Despite the advantages of fixed fluoro equipment and with today's technology frequently improving,  mobile units are continually advancing and becoming more powerful.   Tune in for "Take 3" of adventures with the C-Arm!


Comments

Post a Comment

Popular posts from this blog

Take 4: Components of Fluoroscopy

The fluoroscope unit is similar to that of a general x-ray unit; however there is one key difference-- it's flipped flopped.  On a regular x-ray unit, the tube is positioned above the patient table and the image receptor is underneath the patient.  On the other hand, the fluoro x-ray tube is located underneath the patient table and the image receptor above.  Here is a simple description of each of the components of the fluoroscopy unit:   1.   Generator : This is important for converting the alternating current (AC) to direct current (DC) which then allows for the adjustment of mAs and kVp as well as to select pulsed fluoroscopy (ASRT, 2010). 2.   X-Ray Tube :  This is contained within a glass or metal tube to help prevent leakage and scatter radiation.  DC will flow from cathode to anode; and once the electrons reach the anode, x-rays are produced.   3.   Collimator: Blades that allow for modification of shape/size of x-ray field, reduction of scatter radiation thus resulting
Post a Comment
Read more

Take 7: Image Intensifier vs Flat Panel Detector

As mentioned before in "Take 4," the Image Intensifier (II) and Flat Panel Detector (FPD) are important fluoroscopic components that function similarly yet are different.  Since we know that the purpose of each component is to brighten the image without increasing dose, here is a brief comparison of the difference of both the II and FPD. Here is what's different about the II: Consists of input phosphor, photocathode, electrostatic focusing lenses, anode, output phosphor, and glass envelope Input phosphor: absorb and convert x-rays to light photons Photocathode: absorbs the light created by input phosphor and then emits photo(light)electrons Electrostatic focusing lenses: guides and directs photoelectrons to output phosphor Anode : these photoelectrons then pass through the anode Output Phosphor: converts the photoelectrons that exited the anode to light photons Here is what's different about the FPD: "All flat panel detectors used in radiol
Post a Comment
Read more

Take 9: Dose Limits & Exposure Patterns

For the protection and safety of radiation workers ands staff, it is very important to limit the amount of dose as much as possible.   It is our responsibility as radiation workers to keep radiation exposure ALARA- As Low As Reasonably Achievable!  In addition to the three keys (time, distance, and shielding) of radiation safety and protection, there are other ways to manage dose.  For example, the number of image taken and repeated.  During fluoroscopy, setting the number of frames per second is one way the radiologist can limit patient dose.  The more frames (or pictures) taken per second, the more radiation being exposed to the patient and surrounding people (ASRT, 2010).  In order to effectively protect workers and patients, dose limits have been established.  Check out the table below!... sorry for the poor quality screenshot.  Note: Dose equivalent is measured in Sieverts and/ or rems. (1 rem= .01 Sv)  Statkiewicz-Sherer, Mary Alice, Paula J. Visconti, E. Russell Ritenour, an
Post a Comment
Read more